Swelling waterstop bar
hit: 107641 ¡æ
contact us
TEL: +8613132415777FAX:
Email: jerry@geomembraneup.com
¡¡¡¡ sales@prolianz.com
URL: http://www.prolianz.com
ADD: Hengshui City, Hebei Province, China
hit: 107641 ¡æ
Rubber waterstop stips are classified into 3 types, including PZ strip waterstop, butyl rubber waterstop, bentonite strip waterstop.
PZ Strip Waterstop - Smaller Size & Stronger Structure
PZ waterstop is a new type hydrophilic watertight product manufactured of quality vulcanized rubber and other additives, which make it expansible with physical properties of rubber.
Applications of PZ Waterstop
¡ñ Pipe penetration.
¡ñ Water reservoirs.
¡ñ Settling pond.
¡ñ Deformation and concrete construction joints of civil engineering.
¡ñ Water conservancy and hydropower projects, etc.
Properties of PZ Waterstop
Physical properties | PZ-150 | PZ-250 | PZ-400 | PZ-600 | |
Hardness (shore A) | 42¡À7 | 42¡À7 | 45¡À7 | 48¡À7 | |
Tensile strength | 3.5Mpa (min) | 3.5Mpa(min) | 3Mpa(min) | 3Mpa(min) | |
Elongation | 450% (min) | 450% (min) | 350%(min) | 350% (min) | |
Expansion rate | 150% | 250% | 400% | 600% | |
Repeated water immersion test | Tensile strength | 3Mpa (min) | 3Mpa (min) | 2Mpa(min) | 2Mpa (min) |
Elongation | 350% (min) | 350% (min) | 250%(min) | 250% (min) | |
Expansion rate | 150% | 250% | 300% | 500% | |
Low temperature bending (-20¡ãC*2h) | No crack | No crack | No crack | No crack |
Butyl Rubber Waterstop for Concrete Constructions
Butyl rubber waterstop is a type of hydrophilic water sealing product to prevent any passage of water through non-moving construction joints. Composed of quality butyl rubber and mastic or expansible clay, when exposed to water, the waterstop swells and forms a permanent compression seal in non-moving concrete construction joints.
Applications of Butyl Rubber Waterstop
¡ñ Concrete construction joints.
¡ñ Non-movingjoints.
¡ñ Portable water tank, box culverts and tunnels.
¡ñ Water containments.
¡ñ Pipe penetrations.
¡ñ Manholes.
¡ñ Slab and walls below grade.
¡ñ Cast in place applications.
¡ñ Foundations and basements.
¡ñ Utility and burial vaults.
¡ñ Precast concrete wall panel system.
¡ñ Wet wells.
Properties of Butyl Rubber Waterstop
Physical properties | Test method | Type BRWS-1 | Type BRWS-2 | Type BRWS-3 |
Color | - | Black | Black | Black |
Material | - | Butyl and mastic | Butyl and mastic | Butyl and expanded clay |
Specific gravity | ASTM D-71 | 1.35 | 1.22 | 1.60 ¡À 5% |
Volatile matter | ASTM D-6 | 1% | 1% | 1% |
Penetration, cone at 77¡ãF, 150 gm, 5 sec. | ASTM D-217 | 40 mm | 62mm | 40 ¡À 5 mm |
Application temperature | - | -10¡ãF to 125¡ãF | -30¡ãF to 200¡ãF | -10¡ãF to 125¡ãF |
Service temperature | - | -30¡ãF to 180¡ãF | -30¡ãF to 200¡ãF | -30¡ãF to 180¡ãF |
Bentonite Strip Waterstop -Solutions to Water Containment Needs
Bentonite waterstop is a kind of hydrophilic water sealing product coming with incomparable durability and higher water absorption no less than 300%. Unlike traditional clay based waterstops, this one utilizes rubber as base material to form a controlled, moisture active sealant - that means the bentonite waterstop will not expand to point losing much of integrity even being washed away by water during continual expansion.
Bentonite waterstop with expanded metal Shapesof bentonite waterstops
Applications of Bentonite Waterstop
¡ñ Joints with limited movements.
¡ñ Construction joints and sheet pile joints.
¡ñ Water containment and reservoirs.
¡ñ Water and sewage treatment.
¡ñ Primary and secondary structures.
¡ñ Manholes and elevator pits, manure pits
¡ñ Tunnels, culverts, dams, water tanks and canals.
¡ñ Pipe penetrations.
¡ñ Swimming pools and parking garages.
¡ñ Retaining walls.
¡ñ Precast concrete structure.
¡ñ Foundations and basements.
¡ñ Slabs and king post.
¡ñ Fast track projects
Properties of Bentonite Waterstop
Physical properties | Test method | Result |
Color | - | Black |
Specific gravity | ASTM D-71 | 1.35 ¡À 5% |
Hydrocarbon content | ASTM D-4 | 47% (min) |
Volatile matter | ASTM D-6 | 1% (max) |
Penetration, cone at 77¡ãF, 150 gm, 5 sec. | ASTM D-217 | 40 mm ¡À 5% |
Application temperature | - | -10¡ãF to 125¡ãF |
Service temperature | - | -30¡ãF to 180¡ãF |