Welcome to Hengshui Jianfeng Engineering Rubber co., LTD.,

PTFE sliding plate type bridge bearing

author: Jianfeng Engineering from: ԭ date: 2017/6/20 18:00:00 hit: 10016
Tips: PTFE sliding plate type bridge bearingReferred to as PTFE slide bearing, this product is made from o...

PTFE sliding plate type bridge bearing

Referred to as PTFE slide bearing, this product is made from ordinary laminated rubber bearing is bonded on a thick layer of 2-3mm Teflon plate. In addition to the vertical with normal rubber bearing stiffness and elastic deformation under vertical load and can adapt to the rotation of the outer end of the beam, because of low coefficient of friction between the stainless steel plates and beams of tetrafluoroethylene (U = 0.03) at the end of the horizontal displacement of the upper structure of the bridge is not restricted, span >30 meters long span bridge, continuous slab beam and multi span continuous beam bridge can be used as a movable support; continuous beam pushing, T beam lateral and large equipment can be used as a slip slider.

Type of rubber bearing

A: Neoprene: suitable temperature +60 to -25 degrees

B: natural rubber: suitable temperature +60 to -40 degrees

The support is used to support the container or the weight of the equipment and the supporting component is fixed in a certain position, but also bear the vibration and earthquake load operation. Rubber bearing is rubber and steel sheet closely together, to support the weight of the bridge.


  

contact us

TEL: +8613132415777
FAX: 86-318-8538660
Email: eric@prolianz.com
sales@prolianz.com
URL: http://www.prolianz.com
ADD: Hengshui City, Hebei Province, China

Copyright © 2016 Hengshui Jianfeng Engineering Rubber co., LTD., All Rights Reserved.
SITEMAP | XML | RSS