Back a detailed description of the rubber sealing belt type:
Back stick type rubber sealing strip is the national standard GB18173.2-2000< polymer water-proof materials > organization production. So we can produce various shapes according to user requirements, the size of the rubber sealing belt, also for the different needs of different parts of the project, a cross shaped, T-shaped, inclination angle and internal and external products, can applicable to any design requirements. The waterstop products in the transportation, should avoid direct sunlight, not with heat, contact with oil and harmful solvent. In Shanghai Province, Changning District bonded rubber waterstop. Products should be taken straight flat, do not increase the pressure. The best -10 C + storage places30 degrees Celsius, relative humidity in the 40%-80%.
Back stick type rubber zhishuidai applicable scope: underground structures, dams, cisterns, pools, and other building roofing material and building deformation joint waterproof. Back stick type rubber sealing strip is using high elastic rubber, produce elastic deformation under various loads, so as to strengthen the effective seal. To prevent the construction of the Water Leakage, and to water seepage cushioning. In many engineering civil building design, and have certain requirements for soil structure expansion, and existing problems such as waterproof and shockproof, and so the installation of rubber waterstop is to effectively solve the above problems by means of back stick type rubber sealing strip. Mainly used forWhen in cast-in-place concrete construction joints and deformation joints, and foundation engineering, concrete structure has become one of the underground facilities, tunnel culvert, aqueducts, dams and so on, to ensure the construction of life.