I produced the detachable rubber water stop belt can be detachable processing rubber waterstop, chloroprene rubber removable rubber waterstop and three EPDM removable rubber sealing strip, the general construction waterproof joints, can choose the rubber sealing belt, when the case of weak acid, alkali corrosion medium when should use chloroprene rubber waterstop; when the oil medium should choose nitrile rubber waterstop; when the mould erosion may be, should consider the mold sealing strip, the level should reach level 2 Level 2 or above; when the temperature of -25 DEG ~60 DEG with chloroprene rubber seal with -35 ~60 DEG C when using rubber zhishuidai -40 DEG ~60 DEG when using three EPDM rubber sealing belt. The rubber sealing strip is embedded with the standard GB18173.2-2000< molecular water-proof materials > organization production. So we can produce various shapes according to user requirements, the size of the rubber sealing belt, also for the different needs of different parts of the project, a cross. T type, slope type and angle type products, can be applied to any design requirements. The waterstop products in the transportation, should avoid direct sunlight, not with heat, contact with oil and harmful solvent. The finished products should be taken straight flat, do not add weight. Keep -10 - C storage places+30 C, relative humidity in 40%-80%. buried rubber waterstop applicable scope: underground structures, dams, cisterns, pools, and other building roofing material and building deformation joint waterproofing.
Back stick type rubber sealing strip
Back stick type rubber strip is mainly used for foundation engineering of cast-in-place concrete in construction joints when the deformation joints in concrete structure and become one of the facilities such as underground tunnel, culvert, aqueducts, dams, liquid storage structures and so on. In the rubber waterstop, if it is found that the concrete pouring process in all or part of buried in the concrete pouring, there are many sharp stones and sharp head reinforced concrete, the tear strength of rubber and plastic tensile and low 3-5 times, once the waterstop punctured or torn, without external force gap will expand, so the waterstop positioning and concrete pouring process, should be note positioning methodAnd pouring pressure, so as to avoid the water stop is punctured. Product of rubber seal, rubber belt, water swelling seal, two-component polysulfide sealant waterproof construction in the same industry have been gained in the assessment of the quality of an extension of the production of rubber, rubber waterstop, grouting, two-component polysulfide building waterproof sealant is widely used in water diversion process!