Welcome to Hengshui Jianfeng Engineering Rubber co., LTD.,£¡

Installation of bearing.

Cut open and remove Laminated Elastomeric Bearings from packing and clean any dirt if found on it.Place bearing on top of applied epoxy resin. Care should be taken, to see that, the bearing is placed ...

What¡¯s the appearance of good rubber waterstop

No. Defect name Appearance standard 1 Bubble Products are not allowed to have more than three bubbles per meter, and the bubble diameter is not larger than 1mm 2 Impurity Products are not allowed to...

which pot bearing is suitable for our project

Type 1USA:Completely Fixed Pot BearingCorresponding to China: Fixed bearing: with vertical load and vertical rotation performance, code named GD.Type 2USA:Free in one (lateral OR longitudinal) directi...

What¡¯s the basic structure of pot rubber bearing

Multi movable and single movable bridge bearing composite from top seat board (including the roof and stainless steel), PTFE slide plate, intermediate steel plate, sealing ring, rubber plate, bottom b...

which bridge bearing is more suitable for us

There are ten main types of bridges bearings are supplied to meet your different needs. Some specific designs are also available as your request.Laminated elastomeric bearing is manufactured through t...

Analysis of the waterstop fracture

Analysis of the waterstop fracture1, concrete shrinkageThe use of construction joints of the buildings are mostly long structure, because the structure of large area construction of a large amount of ...

classification of laminated rubber bearing

Divided by the shape: Rectangular laminated rubber bearing, round plate rubber bearing .What¡¯s the benefit of rubber bridge bearing characteristics:1.Simple structure, convenient processing;2.in less ...

What¡¯s the application of rubber bridge bearing

The product is mainly used in highway bridges, railway bridges, urban overpass. The main function is transferring the reaction force of upper part reliably to the pier, and also can complete the horiz...

Installation of Rubber Bearing

Install of rubber bearing A: Installation Preparation A.1 laminated rubber bearing installation should set the bearing pad stone, bearing pad stone plane size should be determined based on the loc...

Division of Laminated Rubber Bearing

Division of Laminated Rubber Bearing It divides into the ordinary laminated rubber bearing and PTFE laminated rubber bearings. For ordinary bridge bearings is applicable to span less than 30m, bridg...

Attentions of Rubber Bridge Expansion Joint

Attention of Rubber Bridge Expansion Joint 1, due to transportation expansion device length limit, can block manufacturing, field stitching. Expansion device stored in the site should be placed in ...

Introduction of Type steel expansion joint

Introduction of expansion joint modular Type steel expansion joint in accordance with the performance and installation methods can be divided into: type GQF-MZL, type GQF-C, type GQF-Z, type GQF-L, t...
total: 122912/pageFirstPrev1234567Nextlast1/103
  

contact us

TEL: 86-15132836877
FAX: 86-318-5106277
Email: waterstop@prolianz.com
¡¡¡¡ sales@prolianz.com
URL: http://www.prolianz.com
ADD: Hengshui City, Hebei Province, China

Copyright © 2016 Hengshui Jianfeng Engineering Rubber co., LTD., All Rights Reserved.
SITEMAP | XML | RSS